Jump to content
×
  • Can you help us?

    If you have some serious passion for your local scene, and are interested in helping us build Australia's newest electronic music community, hit on the Apply Now button below to become an Ozclubbers contributor!

    Apply Now

     

  • Sign in to follow this  

    Layering Synths


    Ozclubbers Staff

    synth secrets - layering synths

    Synth Secrets is a series of programming tutorials in which we show how to make a range of classic and new synth sounds using plugins such as Massive, Sylenth and Diva. In this Synth Secrets, we’ll be taking a look at some synth layering techniques to create a one sound comprised from all three separate layers. Each synth will fill a specific frequency range and in doing so we can create a huge synth sound that is significantly greater than the sum of its parts Here’s some audio of the loop we’ve created: [audio mp3="https://6e80timjxr-flywheel.netdna-ssl.com/wp-content/uploads/2018/10/Intro-Audio.mp3"][/audio] And here’s the MIDI we’ve used for the lead in F#: MIDI Attack Magazine

    Step 1

    We’ll begin with the sub. We load up the EXS24, in its default state it’ll play a sine wave (so any synth capable of a sine wave will be ample for this sound). We tweak the Attack and Release on ENV2 (the amplitude envelope) so the sound doesn’t click. We then we add our notes on F#0 meaning the sound peaks at around 60Hz (40Hz-60Hz is generally a good place to be with sub bass, though this is of course subjective!). We create a MIDI pattern playing one note, with some syncopation to create a nice groove. For the sub layer, we mute the first note in each 2 bar section as it clashes with the kick drum. Sub MIDI Attack Magazine We apply some simple EQ to the sub, rolling off any frequencies above 190Hz and getting rid of any rumble by applying a low cut filter sweeping up to 30Hz. We also add an LFO Tool to the sub and although the rest of the notes avoid the kick drum, some of the release on each note could potentially clash with kick. [audio mp3="https://6e80timjxr-flywheel.netdna-ssl.com/wp-content/uploads/2018/10/Step-2-Sub-lower-midrange-bass.mp3"][/audio] EXS24 Attack Magazine Processing Attack Magazine

    Step 2

    Now for our lower midrange layer. We opt for U-he’s Repro-5 for this sound, mainly because it has a very warm analogue tone, so any virtual analogue synthesizer will be perfect if you don’t have Repro-5. We copy over the MIDI from the sub channel, but unmute the first note. We also shift the notes up +2 octaves to F#2. Repro-5 Attack Magazine Again, the sound design here is quite straightforward. For Oscillator A we take the Octave down to 0, and for Oscillator B we turn on the Triangle Wave, take the Octave down to 0 and the Frequency to -12 (which takes the pitch down a further octave). We bring the Cutoff on the filter down to 19.50, and push up the Envelope Amount to 59.50, applying some more filter envelope modulation. We bring the Sustain down a little on the Filter envelope and take it down completely on the Amplifier envelope, for a tighter sound. Over on the Effects we add some Soft Clip Distortion, pushing up the amount and pulling down the mix. We also add the Velvet tape saturation and use the Dark mode. Some EQ again for this layer, cutting up to about 130Hz to make space for the sub, we also roll off the highs above 3k, as the next synth will take care of those frequencies. We also add a compressor in the form of Cakewalk’s CA-2A, to reign in some of the dynamics, compressing between 2-3db. [audio mp3="https://6e80timjxr-flywheel.netdna-ssl.com/wp-content/uploads/2018/10/Step-3-Sub-lower-midrange-and-chord.mp3"][/audio] Lower midrange bass processing Attack Magazine

    Step 3

    For our next synth sound we load up an instance of Steinberg’s Retrologue 2. Again any virtual analogue synth will be fine for this sound, as long as it has at least 3 oscillators. Copying the MIDI over from the previous step, we turn on all 3 oscillators, selecting a saw wave for each. On Osc 2 we turn up the Coarse pitch +3 semitones, and on Osc 3 we bring the pitch down -1 octave and turn the Coarse pitch up to +7 semitones, creating a minor chord. We turn on the Noise generator and turn it up, adding some nice detail in the top end. On the Filter, we push the Envelope amount right up, but bring the Cutoff down and turn up the Resonance to 25. We also add some Tube distortion by turning the amount up to 40% for a nice amount of distortion at the filter stage. Retrologue Attack Magazine We set the filter envelope with a medium Decay and short Sustain, whilst on the Amplifier envelope we set a high Sustain and medium Release, this means that with the cutoff down the notes will be short and snappy and as we push up the filter we’ll engage the amp envelope and create longer notes, adding to the drama. [audio mp3="https://6e80timjxr-flywheel.netdna-ssl.com/wp-content/uploads/2018/10/Step-3-Sub-lower-midrange-and-chord.mp3"][/audio] [advert]

    Step 4

    For the chord layer processing, we begin with an EQ, applying a low cut up to 250Hz. We then compress the sound, again using the CA-2A. We set the peak reduction to compress by around 5db on the sections when the filter opens up, thus making the sound a little less dynamic. We also add Izotope Ozone 7’s Imager, turning on the Stereoize control and taking the amount up to 13.2, we add width to Bands 3 and 4, applying some stereo imaging to the frequencies above 2k. [audio mp3="https://6e80timjxr-flywheel.netdna-ssl.com/wp-content/uploads/2018/10/Step-4-Sub-lower-midrange-and-processed-chord-.mp3"][/audio] Chord Sound Processing Attack Magazine

    Step 5

    Now for some Bus send effects on the chord. We begin with a Stereo Delay, setting the Left and Right Delay Times to 1/8th notes, we push up the Crossfeed on both the Left and Right delay and sweep up the Low Cut, adding a 'ping pong’ style delay effect. To make the delay a little tidier, we route the chord layer to another Bus, this time muting the output of this Bus, we can now use this Bus as a sidechain trigger. Going back to our delay bus, we add a [advert-inline] Compressor after the delay, keying the Sidechain to the muted Bus channel, and then set some sidechain settings on the compressor, with a fast Attack and Release. We’re now ducking the delay when the chord notes play. Stereo Delay Attack Magazine After the compressor we add an LFO Tool to also duck the delay on the kick drum, again tidying things up in the mix. On a third Bus, we add Valhalla’s Vintage Verb, setting a fairly atmospheric reverb using a Decay time of 2.88 s, we take down the HighFreq Damping and High Cut for a darker and deeper effect. [audio mp3="https://6e80timjxr-flywheel.netdna-ssl.com/wp-content/uploads/2018/10/Step-5-Sub-lower-midrange-and-processed-chord-with-Bus-send-effects-.mp3"][/audio] Chord Verb Attack Magazine

    Step 6

    Finally, we group all 3 sounds together and add some group compression. Loading up the Native Instruments Solid Bus Comp, we apply around 4db of gain reduction, use a Ratio of 2 to keep the effect subtle and set a medium Attack and Release. This compression serves to ‘glue’ the separate layers together to give a more cohesive feel and make the sound appear more like one big synth rather than 3 separate layers. We also add some filter automation to the chord layer, which works well to add more tension to breakdown sequences. [audio mp3="https://6e80timjxr-flywheel.netdna-ssl.com/wp-content/uploads/2018/10/Step-6-Group-compression-and-automation.mp3"][/audio] Group compression Attack Magazine Automation Attack Magazine

    Source: Attack Magazine

    Sign in to follow this  



  • Comments

  • We source our news and reviews from a number of sources.  From our local volunteer contributors (writers and reviewers) around Australia, to syndicated news sources including Your EDM, Dancing Astronaut, MixMag, By The Wavs, MNML, No Dough Music, Techno Kittens, Drum and Bass News, BBC, Junkee, and Trance Family.  Where the article has been sourced via syndication, you will find a link at the bottom of the article to the original source.

    Our local volunteer contributors are creative people who are passionate about the dance music and club scene in Australia and want to share their passion with others.  If you feel you fit into this category, we would love to hear from you!  Send us an application to become a contributor (writer / reviewer) by visiting https://ozclubbers.com.au/application

Add Your Event for FREE
Invite A Friend


×

Important Information

By using this site, you agree to our Terms of Use. Privacy Policy, and Guidelines